Automatic Screw Feeder KFR-1050 Kilews for M1.0-M5.0

Automatic Screw Feeder KFR-1050 Kilews for M1.0-M5.0

All Kilews products supplied by our company are CE certified.
 
Timely and accurate screw feed during serial assembly is one of the key factors. KILEWS specialists have received numerous requests for the development and implementation of an automatic screw feeder. After researching the market and other manufacturers' products, KILEWS introduced a proprietary automatic screw feeder, which turned out to be significantly more cost-effective.
 
Properties:

•     The widest range of diameters of the supplied screws (11 sizes):

1.0mm to 5.0mm (1.0mm, 1.2mm, 1.4mm, 1.7mm, 2.0mm, 2.3mm, 2.6mm, 3.0mm, 3.5mm, 4.0mm and 5.0mm).

•     Maximum screw length and large loader capacity:

Screw length: up to 19 mm (under the head).
Loader capacity: 200 - 220 cm3.

•     Application of screws with specific characteristics:

It is possible to use screws with a length: diameter ratio of 1 = 1 and 1 <1.
It is possible to use screws with a head height of 0.2 mm without screw breakages and errors.

•     Adjustable feed guide:

The feed bar width is easily adjustable. The adjustment can be made in both metric and imperial measurement systems.

•     Adjustable vibration intensity:

With the help of vibrations of small amplitude, the screws are fed to the pick-up point with an electromechanical screwdriver in a clear sequence without blockages and overlays. This ensures maximum productivity.

•     Simplicity and ease of use:

Light and sound indication.
Short circuit and overload protection.
Sophisticated ESD and EMC earthing system.