Fast Cure Thermally Conductive Adhesive, Flowable 8329TFF MG Chemicals
Thermal conductivity of 0.8 W/(m·K), UL 94V-0 rated (Flame retardant), 5 minute working time. Viscous, yet flowable enough to be dispensed from a syringe or a mixing tip. Can be cured at room temperature or higher.
  • Manufacturer:
    MG Chemicals
  • Model:
    8329TFF
  • SKU:
  • Available:
    1 pcs.
24.00 € (Brutto: 29.52 €)
In stock

Fast Cure Thermally Conductive Adhesive, Flowable 8329TFF MG Chemicals

8329TFF MG Chemicals is a thermally conductive, fast-cure two-part epoxy adhesive. It is off-white, smooth, thixotropic, and bonds well to a wide variety of substances. It is also flame retardant, and meets the UL 94V-0 standard. For a 1 mL quantity, a minimal service cure can be achieved in 15 minutes at room temperature, and a full cure in 4 hours.

8329TFF MG Chemicals is used to bond heat sinks, LEDs and other heat-generating components in electronic assemblies. It is suitable for use with dual-syringes, mix-tips and automatic dispensing systems.

For a longer working life, use 8329TFM MG Chemicals or 8329TFS MG Chemicals.

 

Features and Benefits

  • Thermal conductivity of 0.8 W/(m·K)
  • 1:1 mix ratio
  • Working life: 4 minutes
  • Set time: 15 minutes
  • Cure time: 4 hours at room temperature or 15 minutes at 65 °C (149 °F) 
  • Flame retardant—meets UL 94V-0 standard
  • Provides strong electrical insulation
  • Low CTE prior Tg
  • High tensile and compressive strength
  • Strong resistance to humidity, salt water, mild bases, and aliphatic hydrocarbons
  • Shelf life: ≥3 years
  • RoHS 3 compliant